Window Repair: The Good And Bad About Window Repair

Double Glazed Window Repair

Double-glazed windows are an excellent way to reduce energy consumption in your home. However, they could suffer from a range of problems in the course of time.

Misting occurs by the fact that the gap between the panes allows moisture to enter. This can result in damp, or even mould if it is left untreated.

To resolve this issue, try lubricating the hinges, handles and mechanisms to see if this aids. If not, it could be time to call a professional.

Condensation

Condensation is ugly, but it could be a sign that the seal made of rubber between your double glazed windows has begun to break down. The water vapour that is escaping from the interior of your home can get through the gaps between the insulating glasses and damage the window. The glass could then begin to become cloudy, and it may also rot the wooden frames that surround it.

Luckily it is a situation which can be corrected. To do this, the technician must make small holes into the exterior pane. They will then clean the windows on the inside and use an anti-fog coat to help remove any moisture left behind. It could take from a few hours to several days for the window to completely dry out. Once the window is dry, the contractor can either seal it up or install vents to allow air to flow.

Another option to resolve condensation problems is to simply open the window and let in some fresh air. This will stop excess humidity from accumulating and help to prevent condensation on windows in the future. If this doesn't work and your windows start to look cloudy, you might want to consult an expert.

In cases where the window is still sealed and isn't shattered it is possible to repair it by replacing just one glass pane. It will cost less to replace one glass pane than a whole window.

However should the seals have deteriorated completely, or a large amount of the window has shattered the chances are that the entire unit will have to be replaced. It is a far better option to replace double-glazing windows with a brand new set from the beginning, instead of fixing them over and over again. This will save you money in the end and ensure that your business or home is as comfortable and efficient as you can get it.

Draughts

Double glazing is designed to save energy as it consists of two separate panes of glass with a spacer or inert gas between them to form an airtight seal that keeps warm air in your home and cold air out. However, if you are experiencing issues with draughts or condensation, it could be a sign that your seals are failing and need to be replaced. The best way to identify if this is the situation is to look for damp patches or mould on the frames, sills and any wood that is around it.

Also, if you notice that your windows are hard to open or are sagging the issue could be due to a temperature change that has caused the frame to expand or shrink slightly. This issue can be solved by wiping the mechanism, hinges, or handles down with cold water. It is also worth noting that broken locks and handles are a security risk and should be repaired sooner rather than later.

The mist between your window panes could be a serious issue that can compromise your property's thermal efficiency. This can also lead to condensation, and eventually damp or mould.

Draught excluder kits are a quick solution to a common problem with double glazing.  double glazed window repairs  are available at DIY retailers. They contain adhesives, foam strips, and brushes that can be used to fill in gaps and stop wind from blowing through. You can also fill in gaps using silicone sealant to minimize the chance of draughts. This is particularly useful in winter.

While it is possible to fix double-glazed windows on your own but it's usually easier and less expensive to leave the job to professionals. It is also safer and gives you the peace of mind knowing that the job was done properly and to your satisfaction. If you need to make repairs to a damaged sash, or simply want to add draught proofing, give us a call today for advice and a free quotation.

Smudging

If your double-glazed windows are starting to develop streaks of smudges which just don't seem to disappear, then you might be able eliminate them easily using a non-abrasive cleansing solution. It is possible to remove smudges from your windows by using products like vinegar, lemon or rubbing alcohol. You can also purchase specialist glass cleaners that are more powerful than the ones you use at home. They can remove even the most difficult stains.

Another common problem with double glazed windows is that they may begin to get smudgey between the glass panes. A break in the seal can lead to fog to form between windows. If not treated, this can lead to mould and damp within the building. A double-glazed window repair company can fix the fault and restore the thermal efficiency of your property.

Misty windows can also be an indication that there could be a problem with the seals, but this can often be fixed without having to replace the entire window unit. In some instances it is possible to fix this by drilling tiny holes in the frame, and then putting in a dehumidifier to absorb the moisture that is leaking between the windows.

However, if the condensation between the windows is a regular problem, then it's better to hire an expert to do the job correctly and ensure that the seals are fully intact. This will also stop the growth of damp and mould in the future.

It's possible to clean the smudges between the glass panes in a double-glazed window, but it's not simple. It's not feasible or practical to remove the window, then reseal it, especially if one panes has been broken. An alternative is to use a caulking solution available at the majority of hardware stores and can be used to fill gaps between the panes of glass, restoring the seal and helping to stop the windows from fogging.

Broken Seals

The window seals that hold the edges of triple- and double-glazed windows in place keep water out and heat or cold out. The window seals are the sole thing that keeps condensation from forming between the glass panes. A window seal that is damaged could allow moisture to enter the home, causing mildew and mold.

The seals are constructed of a rubber material and, over time, they will be worn out or break due to wear and tear and extreme weather conditions. Extreme temperature fluctuations may cause seals to expand or contract, which can lead to their breaking. A damaged window seal can make your windows appear cloudy or misty.

There are a variety of solutions to fix windows with double-panes that have a broken seal. The sealant around the edges of the IGU can be repaired as a simple DIY project for homeowners with the proper tools and knowledge. Another option is to replace the IGU itself it is a more complex project that requires disassembling the window frame, and then taking out the existing IGU. This task should be left to experts who have experience in this area.

Another alternative is to have the window resealed, which can be done by a professional in about an hour. This process involves defogging your window, filling the gap with argon or Krypton gas, then sealing the edges of the frame. This is an excellent option for those looking for an easy cost-effective and quick solution for double-paned windows that have failed seals.

To prevent future problems Make sure that your windows are installed by a reputable firm and come with a warranty. You should also have your windows inspected every year to ensure that the seals are in good shape. This will allow you to identify early signs such as discoloration and the loss of sealant.